AbstractThe HST CPJ3015 is a universal vertical profile projector for the length, angle, contour and surface shape of mechanical parts: a Ø312 screen, a 10X standard objective with 20X, 50X and 100X options, 24V/150W halogen transmitted and 21V/150W halogen reflecting illumination, and the DC-3000 阅读 更多 >>

AbstractThe HST MWW-50E is a Wood-based Board Universal Testing Machine built on a 50kN four-column, two-ball-screw frame: a 0.001-1000 mm/min crosshead, closed-loop control of force, displacement and deformation, and a standard fixture set of seven grips that covers the classic wood-based panel tes阅读 更多 >>

AbstractThe HST-UV-A is a Programmable UV Aging Test Chamber whose touch screen controller runs two test modes - fixed value and multi-segment program - shows the current irradiation intensity and blackboard temperature live, accumulates the front and back lamp hours, and keeps a full data trail: re阅读 更多 >>

AbstractThe HST JWJ-10 is a Metal Wire Reverse Bend Testing Machine that runs repeated bending tests on wires from 1 to 10mm diameter: a ±90deg bend angle at up to 60rpm, a touch screen with automatic counting up to 999,999 bends, a photoelectric detector that shuts the machine down the moment the 阅读 更多 >>

AbstractThe HST-XNR-400DT is a touch screen display Melt Flow Indexer that reports both MFR and MVR from one extrusion run: a 0.1-800.00 g/10min (MFR) and 0.1-800.00 cm3/10min (MVR) measuring range, a barrel from room temperature to 450deg C held at ±0.2deg C, eight gravity load grades from 0.325 t阅读 更多 >>

AbstractThe HST DWC-80T is a Touch Screen display Impact Test Low Temperature Chamber built for Charpy notch impact testing of metal materials: it cools a batch of up to 72 standard impact specimens to a set point anywhere in the +30 to -80deg C range, holds it with ±0.2deg C control accuracy, and 阅读 更多 >>

AbstractThe HST-DTQ5 is a benchtop, low-speed precision cutting machine for sectioning high-value materials - the product sheet calls out high-value artificial crystals by name. A 0-600rpm spindle, 0.01mm positioning accuracy over a 25mm mobile-frame stroke, four included clamps and a limit switch w阅读 更多 >>

AbstractThe HST-SQ60 is a benchtop, manual Metallographic Cutting Machine with a 60mm maximum cutting diameter, a 2800rpm spindle and a 2.2kW drive, built to section metal and non-metal samples for metallographic and petrographic examination. With an enclosed, windowed cutting cover, an independent 阅读 更多 >>